In-Situ Level TROLL 300/500/700/BaroTROLL Operators Manual - Manual (Page 71)

1-800-446-7488 71 www.in-situ.com
Extra Large Desiccant
The Extra Large Desiccant is a replaceable desiccant pack designed for high-humidity
environments or deployments where maintenance occurs infrequently. The extra large
desiccant provides six times the drying capability of the Large Desiccant.
Description Part Number
Extra Large Desiccant 0090420
Desiccant Refill Kit
The Desiccant Refill Kit supplies desiccant for the Large Desiccant, Extra Large
Desiccant, and the Outboard Desiccant. It also contains replacement glass wool.
Description Part Number
Desiccant Refill Kit 0029140
Installing Desiccant with Twist-Lock Connectors
1. Remove the protective dust cap from the bottom of the desiccant pack, if applicable.
2. Remove expiring desiccant (if present) from the cable by grasping the textured
section of the cable connector in one hand and the desiccant in the other. Twist in
opposite directions to unlock the desiccant from the cable.
3. Attach the new desiccant pack to the twist-lock connector on the cable.