In-Situ Buoy Radio & Board Replacement Kit User Manual
Instruction sheet, Buoy radio and board replacement kit, Kit contents
Instruction Sheet
Buoy Radio and Board Replacement Kit
Part Number 0094060
Kit Contents
1
Desiccant pack (0087630)
2
Buoy transceiver board with micro processor assembly (0072070)
3
Radio with wire antenna (0075340)
It is important to install radio (0075340) on board (0087960 Rev. F
or later). Boards prior to revision F are not compatible with this
radio.
Programming Module Purchased Separately
A programming module (0085410) is necessary for programming the radios with the
network settings.
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
©
2013. All rights reserved.
0094062 | Rev. 001 | 05/2013