In-Situ Repeater Radio & Board Replacement Kit User Manual
Instruction sheet, Repeater radio and board replacement kit, Kit contents
Advertising
Instruction Sheet
Repeater Radio and Board Replacement Kit
Part Number 0094070
Kit Contents
1
Desiccant pack (0087630)
2
Repeater board (0098430 ver2010A)
3
Radios (2) (0075330)
4
Pigtail UFL connection
Optional Components Purchased Separately
l
Pigtail UFL to N connector (0085460)
l
Standard antenna UFL to RPSMA connector (0085440)
Programming Module Purchased Separately
A programming module (0085410) is necessary for programming the radios with the
network settings.
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
©
2013. All rights reserved.
0094072 | Rev. 001 | 05/2013
Advertising
Table of contents
Document Outline
- 1 Kit Contents
- 2 Optional Components Purchased Separately
- 3 Programming Module Purchased Separately
- 4 Radio Settings Definitions
- 5 Program Radio Network Settings
- 6 Determining Settings from a Known-Good Radio
- 7 Copy Guidelines
- 8 Repeater Settings
- 9 Install Desiccant Pack
- 10 Standard Radio Network Diagram
- 11 Radio Network Diagram Including a Repeater