In-Situ Communication Device Kit for the Aqua TROLL 400 and RDO PRO Probe User Manual
Page 2
Advertising
800-446-7488
2
www.in-situ.com
appropriate wire in the location specified by the diagram.
2. Attach the USB connector to a USB port on the computer.
3. Wait a minute for the computer to recognize the USB device then click the Connect
button.
4. If the software does not connect to the software, you can find the COM port that your
computer has assigned in Windows
®
Device Manager/Ports.
Advertising
This manual is related to the following products: