In-Situ smarTROLL Multiparameter Handheld Maintenance Kit - Manual

Instruction Sheet
SMAR
TROLL™
MP
Maintenance Kit
Part number 0093240
Kit Contents
1. Calibration chamber and sponge wafers (for RDO Sensor calibration)
2. Silicone lubricant (for O-rings)
3. Lens cloth (for RDO Sensor lens)
4. Foam cleaning swabs (for conductivity sensor)
5. pH sensor plug (for storage, not deployment)
6. Replacement O-rings (See back page for installation.)
Information subject to change without notice. In-Situ, In-Situ logo, BaroMerge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
© 2013. All rights reserved.
04/2013 | Rev. 001 | 0093242