KANOMAX 3910 Portable Particle Counter Software Manual - Manual (Page 28)

27
6. Measuring Software
6.5.2. Measurement
Measurement Control:
During a measurement, the program performs measurement timing control, turns the Airborne Particle
Counter pump on and off, and downloads data.
Data Display:
During a measurement, you can display the time series graph and data table in real time.
(Refer to 6.6 Remote Measurement Data Display.)
6.5.3. Measurement Data Storage
Specify the destination to save data manually after measuring.
After completing a measurement, you can specify a file name and destination for the saved data. Data can be
saved as “.CSV (Microsoft Excel comma-delimited character file)” or “.TXT”.
For example, if you enter “Test” as a data file name and choose to save it as “.CSV”, the data is saved as
“Test.KRM” and “Test.CSV”. Also, if you choose to save it as “.TXT”, the data is saved as “Test.KRM” and
“Test.TXT”.
<If an in-progress measurement is interrupted>
If the PC is shut down unintentionally or the power goes out, data can be recovered.
Data for incomplete measurements is saved as a “temp.KRM” file in the folder where the software is stored
(Default location is: “C\:Program Files\KANOMAX\APC3900”).
You can open this file with “Measuring Software” and save it under a different name.