KEPCO CA 35 - Manual

©2005, KEPCO, INC 1
Data subject to change without notice 228-1452 REV 3
I N S T R U C T I O N M A N U A L
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
CA 35
COVER
ENCLOSURES AND
HARDWARE SYSTEMS
DESCRIPTION. The Kepco Model CA 35 Cover (see Figure 1) is supplied for use with Kepco Series RKW 100 Watt
power supplies. The cover includes one 4-40 x 0.25 in. long thread-forming screw (Kepco P/N 101-0470) used to
attach the cover to the power supply as shown in Figure 1; the other mounting screw is part of the RKW power supply.
These screws must not be overtightened (max. torque 10 in.- lbs (1.1 N x m). Refer to Figure 2 for outline dimensions.
INSTALLATION. Remove screw from RKW power supply shown in Figure 1. Slide the cover onto power supply so that
the tabs are aligned as shown in Detail A and secure with two screws as shown in Figure 1.
FIGURE 1. CA 35 COVER INSTALLATION
THREAD-FORMING SCREW
4-40 X 0.25 IN., P/N 101-0470
MAX TORQUE 10 1N.-LBS (1.1N x m)
REMOVE EXISTING SCREW (M3 x 8) FROM
RKW POWER SUPPLY AND USE TO SECURE
COVER TO POWER SUPPLY.
MAX TORQUE 10 1N.-LBS (1.1N x m)
CA 35 COVER
RKW 100W POWER SUPPLY 3042535
COVER TAB
RKW TAB
DETAIL A
RKW TAB
COVER TAB
SEE DETAIL A
SEE DETAIL A