KEPCO DIN KIT FAK-50 (S) - Manual

©1998, KEPCO, INC 1
Data subject to change without notice 228-1338
I N S T R U C T I O N M A N U A L
KIT
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
DIN FAK
-15S, -25S, -50S
DIN-RAIL MOUNTING KIT
FOR SERIES FAK 15W, 25W, 50W
FIGURE 1. S SUFFIX ORIENTATION
INSTALLATION
1. INSTALL COVER. Attach the cover to the power supply per instruction manual supplied with the cover.
2. INSTALL MOUNTING PLATE. Attach the mounting plate to the power supply using the hardware supplied
(see Figure 2). Install plate so that hole closest to edge is closest to power supply terminals; and access holes
are not obstructed by power supply.
FIGURE 2. INSTALLING MOUNTING PLATE ON POWER SUPPLY
TABLE 1. COMPONENTS SUPPLIED
KIT
MODEL NO.
COVER
PART NO.
MOUNTING PLATE
PART NO.
CLIP (QTY 2)
PART NO.
SCREW (QTY 2)
PART NO.
WASHER (QTY 2)
PART NO.
DIN FAK-15S CA 21 189-0705 108-0365
101-0092
(4-40 X 0.312 BHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN FAK-25S CA 22 189-0693 108-0365
101-0092
(4-40 X 0.312 BHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN FAK-50S CA 23 189-0706 108-0365
101-0092
(4-40 X 0.312 BHPH)
103-0014
(NO. 4, INT. TOOTH)
DESCRIPTION. Kepco KITs, Models DIN FAK-15S,
-25S, and -50S each contain a cover, mounting plate,
two clips, and associated hardware (see Table 1) used
to install FAK Series power supplies on a DIN rail. The -
15 suffix is for the 15 Watt Series, the -25 for the 25 Watt
Series and -50 for the 50 Watt Series. The “S” suffix is
for mounting along the short dimension (length) as
shown in Figure 1. Outline dimensions are shown in Fig-
ure 5.