KEPCO DIN KIT FAK-50 (P) - Manual

©1998, KEPCO, INC 1
Data subject to change without notice 228-1316
I N S T R U C T I O N M A N U A L
KIT
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
DIN FAK
-15P, -25P, 50P
DIN-RAIL MOUNTING KIT
FOR SERIES FAK 15W, 25W, 50W
DESCRIPTION. Kepco KITs, Models DIN FAK-15P, -25P, and -50P each contain a cover, a mounting bracket with left
and right preassembled mounting clips and associated hardware used to install FAK Series power supplies on a DIN
rail. The -15 suffix is for the 15 Watt Series, -25 for the 25 Watt Series and -50 for the 50 Watt Series. The “P” suffix is
for mounting the power supply perpendicular to the DIN rail as shown in Figure 1. Outline Dimensions are shown in
Figures 5 (-15P and -25P) and 6 (-50P).
FIGURE 1. P SUFFIX ORIENTATION
TABLE 1. COMPONENTS SUPPLIED
KIT
MODEL NO.
COVER
PART
NO.
MOUNTING
BRACKET
PART NO.
SCREW
(QTY 3)
(Power Supply
To Mounting
Bracket)
PART NO.
WASHER
(QTY 3)
(Power Sup-
ply To Mount-
ing Bracket)
PART NO.
CLIP
(QTY 2)
PART
NO.
CLIP
PLATE
(QTY 2)
PART NO.
SCREW
Thread-form
(QTY 4)
(Clip To
Mounting
Bracket)
PART NO.
WASHER
(QTY 4)
(Clip To
Mounting
Bracket)
PART NO.
DIN FAK-15P CA 21 128-1945
101-0092
(4-40 X 5/16
BHPH)
103-0014
(NO. 4, INT.
TOOTH)
108-0366 128-1971
101-0443
(4-40 X 1/4
BHPH)
103-0014
(NO. 4, INT.
TOOTH)
DIN FAK-25P CA 22 128-1975
101-0092
(4-40 X 5/16
BHPH)
103-0014
(NO. 4, INT.
TOOTH)
108-0366 128-1971
101-0443
(4-40 X 1/4
BHPH)
103-0014
(NO. 4, INT.
TOOTH)
DIN FAK-50P CA 23 128-1974
101-0092
(4-40 X 5/16
BHPH)
103-0014
(NO. 4, INT.
TOOTH)
108-0362 128-1938
101-0443
(4-40 X 1/4
BHPH)
103-0014
(NO. 4, INT.
TOOTH)