KEPCO DIN KIT FAW-50 (S) - Manual

©1998, KEPCO, INC 1
Data subject to change without notice 228-1297
I N S T R U C T I O N M A N U A L
KIT
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
DIN FAW
-15L, -15S, -25L,
-25S, -50L
DIN-RAIL MOUNTING KIT
FOR SERIES FAW 15W, 25W, 50W
DESCRIPTION. Kepco KITs, Models DIN FAW-15L, -15S, 25L, -25S, -25L, and -50L each contain a cover, a mounting
plate with two clips and associated hardware used to install FAW Series power supplies on a DIN rail. The -15 suffix is
for the 15 Watt Series, -25 for the 25 Watt Series and -50 for the 50 Watt Series. The “S” suffix is for mounting the
power supply along the short dimension (width) as shown in Figure 1, the “L” suffix is for mounting along the long
dimension (length) as shown in Figure 2.
FIGURE 1. S SUFFIX ORIENTATION FIGURE 2. L SUFFIX ORIENTATION
TABLE 1. COMPONENTS SUPPLIED
KIT
MODEL NO.
COVER
PART NO.
MOUNTING PLATE
PART NO.
CLIP (QTY 2)
PART NO.
SCREW (QTY 2)
PART NO.
WASHER (QTY 2)
PART NO.
DIN FAW-15L CA 24 189-0700 108-0365
101-0092
(4-40 X 0.312 BHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN FAW-25L CA 25 189-0690 108-0365
101-0092
(4-40 X 0.312 BHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN FAW-50L CA 26 189-0695 108-0365
101-0092
(4-40 X 0.312 BHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN FAW-15S CA 24 189-0701 108-0365
101-0092
(4-40 X 0.312 BHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN FAW-25S CA 25 189-0702 108-0365
101-0092
(4-40 X 0.312 BHPH)
103-0014
(NO. 4, INT. TOOTH)