KEPCO DIN KIT RKW-50 (S) - Manual

©2003, KEPCO, INC 1
Data subject to change without notice 228-1463
I N S T R U C T I O N M A N U A L
KIT
KEPCO
KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11352 U.S.A. TEL (718) 461-7000
FAX (718) 767-1102
http://www.kepcopower.com
email: [email protected]
An ISO 9001 Company.
DIN RKW
-30L, -30S,
-50L, -50S
DIN-RAIL MOUNTING KIT
FOR SERIES RKW 30W, 50W
DESCRIPTION. Kepco KITs, Models DIN RKW-30L, -30S, 50L, and -50S each contain a cover, a mounting plate with
two clips and associated hardware used to install RKW Open Fram Series power supplies on a DIN rail. The -30 suffix
is for the 30 Watt Series, and -50 is for the 50 Watt Series. The “S” suffix is for mounting the power supply along the
short dimension (width) as shown in Figure 1, the “L” suffix is for mounting along the long dimension (length) as shown
in Figure 2.
FIGURE 1. S SUFFIX ORIENTATION FIGURE 2. L SUFFIX ORIENTATION
TABLE 1. COMPONENTS SUPPLIED
KIT
MODEL NO.
COVER
PART NO.
MOUNTING PLATE
PART NO.
CLIP (QTY 2)
PART NO.
SCREW (QTY 2)
PART NO.
WASHER (QTY 2)
PART NO.
DIN RKW-30L CA 33 189-0797 108-0365
101-0434
(M3 X 8, RHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN RKW-30S CA 33 189-0796 108-0365
101-0434
(M3 X 8, RHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN RKW-50L CA 34 189-0794 108-0365
101-0434
(M3 X 8, RHPH)
103-0014
(NO. 4, INT. TOOTH)
DIN RKW-50S CA 34 189-0795 108-0365
101-0434
(M3 X 8, RHPH)
103-0014
(NO. 4, INT. TOOTH)