KEPCO KIT 219-0508, Chassis Slides Kit for RA 19-4C - Manual

©2006, KEPCO, INC 1
Data subject to change without notice 228-1571
I N S T R U C T I O N M A N U A L
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
KIT
219-0508
CHASSIS SLIDES KIT NO. 219-0508
1. DESCRIPTION
This Kepco KIT contains the components required to install bottom-mount chassis slides on Kepco RA 19-4C Rack
Adapters..
2. INSTALLATION OF CHASSIS SLIDES
2.1 MATERIAL SUPPLIED (SEE TABLE 1.)
2.2 PROCEDURE (SEE FIGURES 1, 2, 3.)
1. Remove four feet from bottom of RA 19-4C chassis.
2. Attach slides (108-0458) to each side of rack adapter using four screws (101-0458) (see Figure 1). Locate the
locking detent towards the rear of the chassis to ensure forward travel.
3. Attach slides to cabinet using mounting holes “A.”
FIGURE 1. INSTALLING CHASSIS SLIDES ON RACK ADAPTER (3/4 VIEW OF BOTTOM)
TABLE 1. MATERIAL SUPPLIED
MATERIAL QUANTITY
Slide, Kepco P/N 108-0458 (Accuride 3012590, modified) 2
Screw, 6-32 x 1/4 in. long, Kepco P/N 101-0458 4
Instruction Manual, Kit 219-05 08 1
SLIDE, P/N 108-0458
LEFT AND RIGHT, 20 IN. LONG,
(ACCURIDE 3012590, MODIFIED)
SCREW, P/N 101-0458
6-32 X 0.250 IN. LONG
(QTY 2 PER SLIDE, 4 TOTAL)
3043096
A
A
A
A
A
A
A
A
LOCATE LOCKING DETENT
TOWARD REAR OF CHASSIS
AS SHOWN FOR FORWARD
TRAVEL.
FOR
WA
RD T
RAV
EL