KEPCO KIT 219-0528, Cable Kit - BOP 26600, 2 in Parallel - Manual

©2012, KEPCO, INC
Data subject to change without notice
228-1634 REV 2 051412
I N S T R U C T I O N S H E E T
KEPCO
KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102
http://www.kepcopower.com email: [email protected]
An ISO 9001 Company.
CABLE
219-0528
KIT
CABLE KIT NO. 219-0528
BOP 26600 MODELS (2) IN PARALLEL
I. DESCRIPTION
This kit contains the cables and terminations required to operate two identical 750 Watt Model 26600
BOP power supplies in parallel, effectively multiplying the output current capacity by two.
Refer to the associated technical manual supplied with the 750 Watt Model 26600 BOP power supply
for all instructions regarding installation and operation of multiple units in parallel.
CAUTION: Failure to install the ground cable supplied can result in damage to the power supply.
II. SPECIFICATIONS
Table 2 lists the general specifications for the parallel combination of two identical 750 Watt Model
26600 BOP Power Supplies. For specifications not listed in Table 2, refer to the General Specifications
provided in the associated technical manual supplied with the Model 26600 BOP power supply
TABLE 1. EQUIPMENT SUPPLIED
Item Quantity Purpose
Kepco Part
Number
Output and Common
Power cable
(1.5 ft.)
2
Connects the OUTPUT and COMMON terminal of the Master to the OUTPUT
and COMMON terminals of the Slave.
118-1112
Parallel Control Cable
(1.5 ft.)
1
Provides control signals required for parallel operation.
118-1202
Protection Cable
(1 ft.)
1
Provides interlock protection signals required for multiple unit operation.
118-1126
Master - IN Parallel
Control Termination
1
Provides proper termination for Parallel Control Cable.
195-0109
Protection - OUT
Termination (Slave)
1
Provides proper termination for the slave connection to the Protection Cable.
195-0108
Protection - IN
Termination (Master)
1
Provides proper termination for the master connection to the Protection Cable.
195-0107
Instruction
Manual
1
Lists material supplied.
228-1634
Nut 2
Overcomes tight space for output cable connections. After securing bottom cable
to output terminal stud using one nut, additional cables can be oriented for best
layout and secured with separate nut.
102-0046
Output Sense Cable 1 Connects Output sense terminal to Common sense terminal of next unit. 118-1271
Chassis Ground Cable 1 Connects chassis ground terminals of all units. 118-1272
Ground Cable mounting
hardware
2 sets Each set consists of eight parts, mounted in the following order: No. 10 star lock-
washer P/N 103-0106 (at chassis), No. 10 flat washer P/N 103-0031, No. 10 split
lockwasher P/N 103-0033, 10-32X3/8 nut P/N 102-0008, No. 10 flat washer P/N
103-0031, [lug(s) from ground cable], No. 10 flat washer P/N 103-0031, No. 10
split lockwasher P/N 103-0033, and 10-32X3/8 nut P/N 102-0008. (See
Purpose
at left for part
numbers)
!