KEPCO MA RAX/RTW 300H User Manual
Rax/rtw, 300h, Kepco
©2008, KEPCO, INC
Data subject to change without notice
228-1652 REV 1
060508
I N S T R U C T I O N S H E E T
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11355 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
MA
300H
RAX/RTW
MOUNTING ADAPTER RAX/RTW 300H
DESCRIPTION.
The RoHS-compliant Model MA RAX/RTW 300H Mounting Adapter includes an adapter plate and
mounting screws that allow a 300W RTW power supply to be easily substituted for a horizontally-mounted 300W
RAX power supply. Mount the adapter plate to the RTW power supply using the screws provided (see Figure 1), then
install the adapter plate in place of the RAX power supply using the screws that previously secured the RAX power
supply.
FIGURE 1. ADAPTER PLATE INSTALLATION
4.724
[120.0]
1.821
[46.25]
9.843
[250.00]
ADAPTER PLATE
P/N 128-2322
3043288
SCREW (3)
P/N 101-487
(M4 X 10MM, FLPO)
SEE NOTE 1.
RTW 300W
POWER SUPPLY
SPACER (3)
P/N 104-0312
SEE
NOTES
2 AND 3.
NOTES:
1. MOUNT ADAPTER PLATE TO RTW USING THREE SCREWS
AND THREE SPACERS AT "A" HOLES AS SHOWN.
2. INSTALL ADAPTER PLATE WITH RTW ATTACHED USING "B" HOLES
AND FOUR SCREWS PREVIOUSLY USED TO MOUNT RAX POWER
SUPPLY (NOT SUPPLIED).
3. MAX. PENETRATION AT "B" (SCREW 8-32) MUST NOT EXCEED
5MM.
B
A
A
B
B
B
A
SEE
NOTES
2 AND 3.
SEE
NOTE 1.
SEE
NOTE 1.