KEPCO RKE 1500W Series Operator Manual User Manual
Kepco, Operator’s manual, Rke 1500w series
Advertising
KEPCO
®
THE POWER SUPPLIER™
MODEL
OPERATOR’S MANUAL
KEPCO INC.
KEPCO, INC. ! 131-38 SANFORD AVENUE ! FLUSHING, NY. 11355 U.S.A. ! TEL (718) 461-7000 ! FAX (718) 767-1102
email: [email protected] ! World Wide Web: http://www.kepcopower.com
An ISO 9001 Company.
IMPORTANT NOTES:
1)
The contents of this manual are protected by copyright. Reproduction of any part can be
made only with the specific written permission of Kepco, Inc.
2)
Data subject to change without notice.
©2013, KEPCO, INC
P/N 228-1514r5
RKE 1500W SERIES
POWER SUPPLY
RKE 1500W SERIES
POWER SUPPLY
SINGLE OUTPUT POWER SUPPLIES
SINGLE PHASE, POWER FACTOR CORRECTED
UNIVERSAL AC INPUT
RKE 24-50K, RKE 36-42K, RKE 48-32K
Advertising
Table of contents
Document Outline
- 1.1 Scope of Manual
- 1.2 Description
- FIGURE 1. Mounting Positions For The RKE 1500W Power Supply
- FIGURE 2. Mechanical Outline Drawing Of The RKE 1500W Power Supply
- TABLE 1. Output Ratings and Specifications
- FIGURE 3. Power Rating Vs. Temperature and Input Voltage
- TABLE 2. Power Supply Ratings and Specifications
- FIGURE 4. Locations Of Operating Controls, Indicators and Terminals
- 4.1 Voltage Adjustment
- 4.2 Remote Voltage Control
- TABLE 3. Remote Voltage (RV) Adjustment Range
- FIGURE 5. Connections For Remote Voltage Control
- 4.3 Remote Turn On-Turn Off
- 5.1 POWER FAIL Signal (Optical Coupler Output Alarm Circuit)
- FIGURE 6. Output Alarm Circuit Optically Isolated
- FIGURE 7. RKE 1500W Power Failure Timing Diagram
- 5.2 Overvoltage And Overtemperature Protection
- 5.3 current Limit/Overcurrent Protection
- 5.4 Fan Failure
- 5.5 Undervoltage
- 6.1 Connecting The Load
- FIGURE 8. Correct and incorrect Methods of Load Connection
- 6.2 Parallel Connection
- FIGURE 9. Parallel Connection with Current Balancing
- 6.2.1 Current Balancing
- 6.2.2 Master-Slave Configurations
- 6.2.2.1 Master-Slave, Multiple Loads
- FIGURE 10. Parallel Connection, Master-Slave, Multiple Loads
- 6.2.2.2 Master-Slave, Single Load
- FIGURE 11. Parallel Connection, Master-Slave, Single Load
- 6.3 Series Connection
- FIGURE 12. Series Connection
- 6.4 Preliminary Electrical Check
- FIGURE 13. Functional Checkout