Device description, 8 electrical data – KROHNE DK 32-DK 34 ATEX II3G Ex nA-ic EN User Manual
Page 8
2
DEVICE DESCRIPTION
8
DK32 DK34
www.krohne.com
03/2013 - 4002148602 AD DK32/34 II3G R03 en
2.8 Electrical data
The electrical signal circuits are connected depending on the selected protection type:
Design DK3./../.././../A–Ex
When supplying as intrinsically safe equipment "ic" only to separate intrinsically safe circuits with the
following maximum values.
U
i
16 VDC
C
i
150 nF
L
i
150 µH
Observe the Special Conditions chapter when connecting ( refer to
Special conditions on page 9).
When supplying as non-sparking equipment "nA" only for connection to switch amplifiers in accordance
with NAMUR (IEC 60947-5-6).
Nominal voltage U
N
8 VDC
Nominal current I
N
1...3 mA
Consult the Special Conditions chapter when connecting ( refer to
Special conditions on page 9).
AD_DK32_34_II3G_R03_en_4002148602_PRT.book Page 8 Thursday, March 7, 2013 6:42 AM