Installation, 3 process pressure – KROHNE OPTIFLEX 2200 ATEX EN User Manual
Page 18
2
INSTALLATION
18
OPTIFLEX 2200 C/F
www.krohne.com
04/2013 - 4000861602 - AD ATEX OPTIFLEX 2200 R02 en
2.2.2 Maximum surface temperature of the housing for dust applications
For more data, refer to the table for Ex ia, Ex ia tb and Ex ic devices in the "Ambient and flange
temperature" section.
2.2.3 Process pressure
WARNING!
Equipment category 1/2 D, 2 D, 3 D or EPL Da/Db, Db, Dc: Ex ia, Ex ia tb and Ex ic devices only
Equipment category 1/2 D, 2 D, 3 D or EPL Da/Db, Db, Dc: Ex ia, Ex ia tb and Ex ic devices only
Equipment category 1/2 D, 2 D, 3 D or EPL Da/Db, Db, Dc: Ex ia, Ex ia tb and Ex ic devices only
Equipment category 1/2 D, 2 D, 3 D or EPL Da/Db, Db, Dc: Ex ia, Ex ia tb and Ex ic devices only
If the ambient and flange temperatures of the device are not more than values given in the table
for Ex ia, Ex ia tb and Ex ic devices, the surface temperature of the housing will not be more than
+90
°
C / +194
°
F.
Equipment category and
Equipment protection level (EPL)
Allowable process pressure
[kPa]
[psi]
1/2 G or Ga/Gb
80…110
1
11.6…16
1
Others
As per non-Ex device
As per non-Ex device
1 Atmospheric pressure