American Audio Portable Audio Recorder - Manual (Page 12)

POCKET RECORD DElETING TRaCKS
DElETING TRaCKS:
You can delete your recorded files via computer or using Pocket Record itself. To delete the your
files using the Pocket Record, select the track you want to delete, press MODE/STOP button and
then press DEL/A-B button, the LCD will show “dEL”. Press the DEL/A-B again, and the Pocket Re-
cord will start to delete the track. When the track has been deleted the LCD will show “DELETE” and
the clock return to 00:00:00. This means the track is empty and you can now save a new recording.
POCKET RECORD TRaNSFERRING FIlES
The device can be connected to computer, to copy and store your recorded files onto your computer
(to backup your data), or download/transfer music from your computer to the Pocket Record.
Connect one end of the USB cord to the port of the Pocket Record and the other end of cord to
USB port on your computer.
Once connected to your computer, the computer will detect the Pocket Record as two removable
disks/hard drives (the first disk/hard drive represents the built-in flash memory; the second disk/hard
drive represents the SD card memory). In each disk/hard drive you will find folders for Groups 1–9.
The music you download from your computer to the Pocket Record will be stored in FOLDER 2, and
the track number will depend on the sequence in which the files are transferred. This means that
the track number in FOLDER 2 is not fixed and can be changed at any time if a track is deleted or
added.
If you want the files to have a fixed track number, you can store the music in FOLDER 1. To do this,
you simply need to change the file names. Follow the instructions below to store files in FOLDER 1.
a) If you want to download files to FOLDER 1, and store them in the built in flash memory, with a
fixed track number, change the file name to M_InT_xx (xx is whatever track number you want it to
be).
b) If you want to download files to FOLDER 1, and store them to a SD memory card, with a fixed
track number, change the file name to M_EXT_xx (xx is whatever track number you want it to be).
The same way you connect to a wall outlet to power your Pocket Record you can power the Pocket
Record off of a computer.
Once you have connected to the computer, press the MODE/STOP button once, the Pocket Record
will now enter the operating mode, and now you can operated the Pocke Record with the power of
the computer.
You can leave the operating mode by pressing the MODE/STOP button for 2 seconds.
© American Audio ® - www.americanaudio.us - TT-Record™ Instruction Manual Page 12