General safety information – KROHNE OPTIWAVE 5200 ATEX EN User Manual
Page 7
GENERAL SAFETY INFORMATION
1
7
OPTIWAVE 5200 C/F
www.krohne.com
04/2013 - 4001905802 - AD ATEX OPTIWAVE 5200 R02 en
Figure 1-3: Compact version, Ex ic nameplate
1 ATEX certification agency code
2 Equipment approval category (explosive atmosphere - gas), types of device protection including approved Gas Groups
and temperature classes (T6...T4 or T3 or T2 - depends on the antenna type) and equipment protection level
3 Equipment category (explosive atmosphere - dust), types of device protection including approved Gas Groups, maxi-
mum surface temperature degree of ingress protection (if fitted with the appropriate cable glands) and equipment
protection level
4 4...20 mA passive - HART output option:
4...20 mA passive - HART output option:
4...20 mA passive - HART output option:
4...20 mA passive - HART output option: Intrinsically-safe circuit data
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options: Entity or FISCO power supply parameters
5 Input voltage range and maximum current (4...20 mA passive - HART) / basic current (FF or PROFIBUS PA)
6 Cable entry type and size (M20×1.5 or ½ NPT)