Algolith FRS-1002-MD - Manual (Page 25)

FRS-1002-MD / FRS-1002-MD-LG-PA Guide to installation and operation
25
Attenuation A, Attenuation B
Audio attenuation can be set for mixed channels only, and will have no
effect on a single channel that is not paired with another. Attenuation can
be set to:
• 0 dB
• -3 dB
• -6 dB
Mix Enable
The Mix Enable check box must be checked in order for two audio
channels to be mixed.
Output Gain
The audio Output Gain can be adjusted from -30 dB to 30 dB in 0.5 dB
increments on single audio channels and on mixed audio channels.
Invert
You can perform phase inversion on single audio channels and on mixed
audio channels, by checking the Invert check box.
Mute
You can mute single audio channels and mixed audio channels, by
checking the Mute check box.