Audiovox AVP8280 - Manual (Page 16)

CONTROLS AND INDICATORS (CONTINUED)
13
REMOTE CONTROL BATTERY REPLACEMENT
Before attempting to operate your Remote Control, install the batteries
as described below.
1 Turn the Remote Control face down. Using a fingernail, lift the
battery cover up and off.
2 Install the 3V Lithium Cell battery as shown. Make sure that proper
polarity (+) is observed.
NOTE : Insert the battery beneath the battery case holding pins.
3 Close the battery cover.
REMOTE CONTROL
(backside)
LI TH
IUM CELL3
V
CR2025
+
battery
COVER