Safety instructions, Safety instructions 1.1 intended use, 2 safety instructions from the manufacturer – KROHNE SMARTSENS PH 8150 EN User Manual

Page 5

Advertising
background image

SAFETY INSTRUCTIONS

1

5

SMARTSENS PH 8150

www.krohne.com

11/2013 - 4002543602 - MA SMARTSENS PH 8150 R02 en

Safety instructions

1.1 Intended use

The intended use of the sensor SMARTSENS PH 8150 is the measurement of pH in liquids.

1.2 Safety instructions from the manufacturer

1.2.1 Copyright and data protection

The contents of this document have been created with great care. Nevertheless, we provide no
guarantee that the contents are correct, complete or up-to-date.

The contents and works in this document are subject to copyright. Contributions from third
parties are identified as such. Reproduction, processing, dissemination and any type of use
beyond what is permitted under copyright requires written authorisation from the respective
author and/or the manufacturer.

The manufacturer tries always to observe the copyrights of others, and to draw on works created
in-house or works in the public domain.

The collection of personal data (such as names, street addresses or e-mail addresses) in the
manufacturer's documents is always on a voluntary basis whenever possible. Whenever
feasible, it is always possible to make use of the offerings and services without providing any
personal data.

We draw your attention to the fact that data transmission over the Internet (e.g. when
communicating by e-mail) may involve gaps in security. It is not possible to protect such data
completely against access by third parties.

We hereby expressly prohibit the use of the contact data published as part of our duty to publish
an imprint for the purpose of sending us any advertising or informational materials that we have
not expressly requested.

DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex
documentation.

CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.

INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.

.book Page 5 Monday, November 18, 2013 11:05 AM

Advertising