Physikalisch-technische bundesanstalt, Ec type test certificate – KROHNE M10 Converter H250-H 54 Ex II2G EN User Manual

Page 12

Advertising
background image

Signal converter M10-EEx d – Supplementary instructions

11/2002

12

Attachement A.1

EC Type Test Certificate PTB 01 ATEX 1154

Physikalisch-Technische Bundesanstalt

PTB

Brunswick and Berlin


(1)

EC Type Test Certificate


(2)

Devices and protective systems for use as prescribed
in hazardous areas - Directive 94/9/EC


(3)

EC Type Test Certificate Number

PTB 01 ATEX 1154

(4)

Device:

Variable-area flowmeter H…./…./M10-EEx


(5)

Manufacturer:

KROHNE Messtechnik GmbH & Co. KG


(6)

Address:

Ludwig-Krohne-Str. 5, 47058 Duisburg, Germany


(7)

The design of this device as well as the variously approved versions are defined in the
Schedule to this Type Test Certificate and in the documents listed in the Schedule.


(8)

The Physikalisch-Technische Bundesanstalt, being the notified body No. 0102 in
accordance with Article 9 of the Council Directive of European Communities dated
23rd March 1994 (94/9/EC), certifies that the basic health and safety requirements
have been satisfied for the conception and construction of devices and protective
systems for use as prescribed in hazardous areas in accordance with Appendix II of
said Directive.

The results of the test are specified in the confidential test report PTB Ex 01-11294.


(9)

The basic health and safety requirements are satisfied by conformity with


EN 50014:1997 + A1 + A2

EN 50018:2000


(10) If the character “X“ is appended to the certificate number, this refers to special

conditions for the safe application of the device as given in the Schedule to this
Certificate.


(11) This EC Type Test Certificate applies only to the conception and construction of the

defined device in accordance with Directive 94/9/EC. Further requirements of said
Directive apply to the manufacture of that device and to putting it on the market. Such
requirements are not covered by this Certificate.


(12) The marking of the device must include the following details:

II 2 G EEx d IIC T6 … T1


Certification Agency for Explosion Protection

Brunswick, 30st September 2002

on behalf of

Official stamp

(signed)

of the PTB

Dr.-Ing. U. Klausmeyer

Regierungsdirektor

Page 1/4

Advertising