Washing machine description, How to open and shut the drum, Control panel – Hotpoint Ariston AVTF 109 User Manual

Page 16

Advertising
background image

16

GB

Washing machine description

A) Opening (Fig. 1).

Lift the external lid and open it completely.

B) Opening the drum (Soft opening):

With one finger, push the button indicated in fig. 2

and the drum will open delicately.

C) Loading the washing machine. (Fig. 3).

D) Shutting (Fig. 4).

- close the drum fully by first shutting the front door

followed by the rear one;

- then ensure the hooks on the front door are perfectly

housed within the seat of the rear door;

- after the hooks have clicked into position, press

both doors lightly downwards to make sure they

do not come loose;

- finally shut the external lid.

E)

Drum End Stop (Fig. 2).

Once the wash cycle has been completed, the

drum will position itself with the doors facing

upward for ease of opening.

How to open and shut the drum

Display:

displays the progress of the wash cycle and/or the

programme (see pages 17-19).
SPIN * key Regulates the speed and cancels the spin

cycle speed completely (see page 19).
TEMPERATURE key adjusts the wash temperature

from 90° to 0°. (see page 19).
DELAY TIMER key. To delay the start of the wash

cycle by up to 24 hours (see page 19).

KEYBOARD LOCK key. To lock all the keys on the

washing machine during operation or during Stand-by

mode.
ON/OFF key to turn the washing machine on and off

(see page). 18).
START/RESET key. To start programmes or cancel

incorrectly set programmes (see page 18).
PROGRAMME knob. Selection of programmes (on

page 18).

PROGRAMME

SELECTION

knob

Control panel

FUNCTION

buttons

Display

ON/OFF

key

START/

RESET

key

TEMPERATURE

SPIN CYCLE

DELAY

TIMER

KEY-

BOARD

LOCK

*

To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by continuously

rotating the drum at a speed which is slightly faster than the normal washing speed.

When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set frequency.

If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.

The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Advertising
This manual is related to the following products: