KROHNE OPTIFLEX Hart User Manual
Page 27
Advertising
User Guide for Optiflex (TDR) DD of AMS
Dev Rev-01, DD Rev-02
© 2006 KROHNE SAS 26103 Romans (France)
Page
27
of
42
The snapshot is activated by a specific parameter (Snapshot Activation). That’s why it is necessary to send its
new value to the device.
3.11 Auto Probe Length Calculation
If the device version is > 77 then this function can be used.
When the tank is empty and if the service parameter “Probe End Type” is not equal to zero then it is possible
to use this function in order to calculate automatically the probe length.
Of course, this function has to be used only if the probe has been shortened.
Advertising