KROHNE Summit 8800 Vol 3 - Manual (Page 138)

138 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol3 R02 en
SUMMIT 8800 COMMUNICATION 08
The register list functions are:
Import from file
Import a modbus slave setup from a file
Export to file Export the existing modbus setup to a file
Clear Clear the full modbus list. Please be aware that there will not be a warning.
The line functions are:
Inset a line or group
Drag a variable or group of variables to the right and drop it. at the blue line.
Group lines Hold CTRL and select lines or select a start line and hold shift and select the
last line
Delete line or group Select an item/ group and press the delete key or right click and choose
delete selected
Change address and addresses block (group of variables that together have one address):
Figure 187 Modbus serial settings
Change start address Select a line, right click on address field and select change start address
Create an address block Select a group of lines and right click on address field and select change
addresses
Split an address block Select the first line in a block, right click on address field and select split
addresses
Figure 188 Modbus register parameter functions
The registers parameter functions are:
Change registers
Change registers from fixed to variable size, give the number of register
Autofit registers Change registers from variable to fixed size, sets the number of registers
automatically
The parameters: type, byte, order, latch, access, indexing and log number functions are: