KYORITSU 1009 - Manual (Page 5)

― 15 ―
● Standards IEC61010-1 Overvoltage CATⅢ 300V, pollution degree 2 / Overvoltage CATⅡ 600V, pollution degree 2
IEC61010-031
IEC61326
● Mode of operation △∑mode
● Indication LCD maximum value 3999 (ACV/A, DCV/A, Ω, F) / maximum value 5119 (Hz) / units, symbols
● Over range display "OL" symbol is displayed on the LCD.
In case that the value is beyond effective measuring range at the position of Ω function range and manual range.
● Auto-ranging Range shifts to upper range when indicated value is more than 3999.
Range shifts to lower range when indicated value is less than 360.
● Sampling rate approx. 400mS
±1.6%rdg±4dgt
±2.6%rdg±4dgt (50 / 60Hz)
±3.0%rdg±4dgt (∼400Hz)
±2.0%rdg±4dgt (50 / 60Hz)
±3.0%rdg±4dgt (∼400Hz)
±1.0%rdg±4dgt
±2.0%rdg±4dgt
Unspecified
Buzzer beeps below about 100Ω
±3.5%rdg±10dgt
±3.0%rdg±5dgt
±3.5%rdg±5dgt
±0.1%rdg±5dgt
±2.5%rdg±5dgt
0∼10A
(2 Autoranging)
0∼4000uA
(2 Autoranging)
0∼400mA
(2 Autoranging)
0∼10A
(2 Autoranging)
0∼40MΩ
(6 Autoranging)
Test current approx. 0.4mA
０∼400Ω
∼100uF
(5 Autoranging)
∼10MHz
(8 Autoranging)
Input sensitivity:
∼1MHz / more than 1.5V(RMS.)
over 1MHz /
more than 2V(RMS.)
0.1∼99.9%
(Pulse width / Pulse period)
４Ａ
10Ａ
400ｕＡ
4000ｕＡ
40ｍＡ
400ｍＡ
４Ａ
10Ａ
400Ω
４ｋΩ
40ｋΩ
400ｋΩ
４ＭΩ
40ＭΩ
40ｎＦ
400ｎＦ
４ｕＦ
40ｕＦ
100ｕＦ
5.12Ｈｚ
51.2Ｈｚ
512Ｈｚ
5.12ｋＨｚ
51.2ｋＨｚ
512ｋＨｚ
5.12ＭＨｚ
10ＭＨｚ
ＤＵＴＹ
ＤＣＡ
ＡＣＡ
Capacity
Frequency
Resistance
Diode check
Continuity check
Allowable measurement time : 10A(15seconds max)
Allowable measurement time : 10A(15seconds max)
Ω