Precision Control Systems PanelIR 4555 - Manual (Page 16)

Model 4555 PanelIR TM User Manual Installation
Figure 3-3 Single Zone
Wiring
Figure 3-4 Single Zone
Single Phase
Schematic
480 V
SINGLE
PHASE
Heater
Incoming Power
Bus Bar
Terminal
Blocks
WARNING!
The electrical power required to operate the 4555 is extremely dangerous. Make sure
all electrical power that is to be provided to the Model 4555 is adequately turned off
prior to making any electrical connection to the heater.
NOTE:
The following instructions are for single-phase electrical wiring of the Model 4555. See
next section for three-phase wiring.
↔
↓
←
Research, Inc. 13