Precision Control Systems DryIR 6030 - Manual (Page 17)

Model 6030 Dry IR Drying System Instruction Manual
Figure A-1. Model 6030 Dimensions.
Maximum Drying Width 4 inches (102 mm)
Overall Length 15 inches (381 mm)
Heated Length 10 inches (254mm)
Lamps (4 Total) 1000W-Rapido-COLL-14OAL
Lamp Rated Voltage 240 volts
Applied Lamp Voltage 240 volts
Amps at Applied Voltage 18.0 amps
KW at Applied Voltage 4.0 KW
Blower Air Volume 75 CFM (2.1m³/min)
Interlock Relays 120 VAC, 24 VAC, 24VDC
Mounting Hardware Extruded Aluminum
Operator Controls
On/Off switch
Heat Adjustment
Automatic Heat Adjustment via Tachometer Input
Circuitry and External Tachometer Kit
(Tachometer Kit Option – ordered separately from
Drying System)
Operation Interrupts When the interlock connections are made, the heater
module will not function unless the transport is
running
Site Requirements
240VAC/30 amp 1
φ service dedicated circuit.
Personnel to position the system in place
An electrician to install a 240VAC/30 amp IEC power
cord, and connect the wiring between the power
control and the transport.
Table A-1. Model 6030 Dry-IR Specifications.
13