Aastra Telecom 6730I - Manual (Page 19)

Model 6730i IP Phone Installation Guide 13
Installation and Setup
Inserting the Key Card
This card contains the label identification spaces for 8 programmable keys.
1. Remove the logo plate from the top front panel of the telephone by gen-
tly pressing down and sliding upward.
2. Slide the card into the programmable key card slot on the top front
panel of the telephone using the display slots for alignment. Ensure the
tabs are sticking out for future removal of the card.
3. Gently slide the logo plate back in place, covering the paper tabs.
Callers
Conf.
Transf
er
6730 i
Logo Plate
Key Card
Display Slots