Revo R16DVR4 - Manual (Page 29)

16 Channel Digital Video Recorder
23
Setting up the Advanced Schedule Mode…
 Schedule Type: Select the Advanced schedule mode.
 Pre-Event Record: Selecting Setup… allows you to set up the
pre-event recording by setting the ips, Quality, Resolution and
Dwell
for each selected camera channel.
 Post-Event Record Dwell: Set the length of time you would like to record for the associated event.
 Add Schedule…: Adds a schedule item. Up to 20 schedules can be registered.
No. – Indicates a schedule number. The higher the number, the higher its priority. (i.e. The schedule No. “20” has priority
over all others.)
Day – Select the days that the recording will take place.
Range – Set the time range that the recording will take place.
Mode – Select the recording mode. ( : Time (Time-lapse) recording, : Event recording, : Time & Event recording)
Channels – Select which cameras will be recorded.
Settings – Set the ips, Quality and Dwell of the recording for the selected recording mode in the Mode column. If you do
not set the Settings column, the DVR will follow the default settings. See below for details.
– Deletes the recording settings.
NOTE: Day, Range and Channels that are not defined will use the setting values of the previous schedule item.
NOTE: When more than two schedule items are registered in the same day and time range, the DVR will follow
the latest registered schedule item.
EVENT SETUP
Motion Event Settings (EVENT
 Motion Tab)