Revo REVDM700-2RC - Manual

IR Vandal Resistant Dome Camera
Accessories
Installation
Specifications
Dimensions
Step.1
TV System NTSC PAL
Image pick-up Device 1/3” 520K Sony Super HAD II Color CCD
Number of Pixels
H 976 976
V 494 582
Scanning Frequency
H 15.734KHz 15.625KHz
V 59.94Hz 50Hz
Horizontal Resolution Color 700 TV Lines
Scanning System 2:1 Interlace
S/N Ratio More than 52dB
Min. Sensitivity 0.1 Lux at F : 1.4
IR LED 10 pcs of IR LEDs
Gamma Correction 0.45 Approx.
Gain Control Automatic
Video Output Composite Video 1.0Vp-p/75Ω
Lens Fixed 3.6mm Lens
Power Source 12VDC, 140mA minimum
Power Consumption 1.7 Watt
Operating Temp. -10℃ ~ +50℃
Dimensions (mm)
Flush 61mm(D) X 82.4mm(L)
Surface 66.4mm(D) X 82.4mm(L)
Weight/g 400g
Cable
Part name & Dimension
Step.3
Features
1/3” 520K Sony Super HAD II Color CCD
700 TV Line of resolution
Advanced DNR (Digital Noise Reduction)
D-WDR for clear vivid pictures where strong back-lighting occurs
IR Smart for better night vision performance
Flush vandal dome with surface base
Gimbal bracket
Compact design
Weather proof / IP-66 compliant
845313SUM000-R01 All specification and pictures are subject to change without notice to improve quality.
Step.2
Model No. : REVDM700-2R
(DC12V 140mA /NTSC)
REVO AMERICA
700 FREEPORT PARKWAY SUITE 100 COPPEL
TX 75019 U.S.A TEL: 1-866-625-REVO(7386),
CAUTION! Please use regulated power supply DC12V 300mA
Reverse Polarity Protection
Wiring instructions:
Connect the RJ-12 end of the camera cable
to the extension cable ; connect the extension cable
to the RJ 12 socket on the Back of the DVR