Revo REXN700-2 - Manual (Page 10)

Scene Change
: Detect a change in the screen.
NOTE:
* It is good for detecting scene change, including vertical lines or high contrast objects of the
background.
* Please don’t use as a signal for video recording start.
* The result of scene change detection can be inaccuracy.
Windy Area Detection
: Detect continuous movement caused by wind or etc.
If same movement occurs in same area, alarm is ignored in this area.
If no motion is detected for a period of time, windy area turns off.
NOTE:
* Please don’t use as a signal for video recording start.
* In Simple mode is not supported.
* The result of windy area detection can be inaccuracy.
1) Zone Base Functions
Max 10 Zone can be configured.
NOTE:
* Because they share area ID with Privacy mask, it can not be used same ID.
- Zone: Select zone ID.
- Func(Function) : Zone Function On/Off (Blinking enabled area).
- Shape: Select area shape.
Color
: Select area’s frame color.
Rect(Rectangle)
: Adjust rectangle with 4-arrow keys.
Press [ENTER] key is to finish edit area.
Poly (Polygon)
It you select one of “a,b,c,d”, the active point is displayed.
Move the point with 4-arrow keys. Press [ENTER] key is to finish edit point.
NOTE:
* For more than 180 of interior angle is not permitted.
Line : Select Start/End Point. It you select one of start/end,
the active point is displayed. Move the point with 4-arrow keys.
Press [ENTER] key is to finish edit point.
Posi
: Adjust area position with 4-arrow keys.
- MD Event
NOTE:
* The result of MD event detection can be inaccuracy.
Zone
: Configurations for various zone events.
Following area, possible events are different.
Output Select:
Press [Enter] key on icon to watching event, popup box appear.
Alarm: Trigger alarm to output port.
Communication: Event string sends on RS-485
Screen: Display on screen.
Back: return to previous menu.
, : Send event to counting machine. (OFF : No Effect /
INC
: Increment counting value. / DEC : Decrement counting value)
10