Revo REHXN0412-1 Quick Installation Guide - Manual (Page 5)

REHXN0412-1, Quick Installation Guide
3. Operation
The Network Camera can be used with Windows operating system and browsers. The recommended
browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome for Windows.
3.1 Access from a browser
1. Start a browser (Internet Explorer).
2. Enter the IP address or host name of the Network Camera in the Location/Address field of your
browser.
3. You can see the starting page. Click Live View or Setup to enter web page.
4. The network camera’s Live View page appears in your browser.
3.2. Access from the internet
Once connected the Network Camera on your local area network (LAN) will be accessible via the
internet. To access the network camera from the Internet you must configure your broadband router
to allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature,
which will attempt to automatically configure the router to allow access to the network camera. This is
enabled from Setup > System > Network > NAT.
For more information, please see “3.5.5 System>Network>NAT” of User’s Manual.
5