Rola-Chem GLOBE FLOWCELL User Manual
Page 2
Rola-Chem Flowcell PN 550182 4/01/2013 page: 2 of 8
Table of Contents
Section title
Page
1.0
Safety
Instructions
2
2.0
Description
2
3.0
Installation
3
4.0
Use
of
Manifold
5
5.0
Maintenance
5
6.0
Trouble
Shooting
5
7.0
Parts List
6
8.0
Warranty
and
Service 7
1.0
Safety Instruction
See controller manual for additional safety instructions.
A-
WARNING: Do not shut down circulating and control system immediately after using pool, spa or hot
tub. Systems must operate until water chemistry is stable. Systems must be restarted before water
chemistry is out of NSPI recommended ranges or water chemistry must be manually corrected.
B-
WARNING: Removing power from circulating pump must also remove power from the controller.
Provide a properly located outlet controlled by the circulating pump circuit.
C-
WARNING: Use a devise such as a flow switch to remove power from the controller in the event of
pool pump or circulation failure. It is not safe to automatically dispensed chemicals into circulating
system that is not running.
2.0
Description
The manifold is designed to be used with a controller as part of a chemical automation system, which
continuously monitors and maintains pH balance and sanitizer level in a swimming pool or spa.