Satechi B4-FM Bluetooth Hands-free Car Stereo Fm Transmitter - Manual (Page 3)

Bluetooth
Transmitter
The Satechi B4 is easy to operate. Follow the instructions
below to get the most out of your product.
Getting Started
Place the Satechi B4 into the 12V cigarette lighter socket.
Adjust the device, so that it can be operated comfortably.
The display will light on immediately and the unit will be
ready for use.
[Getting Started]
Scan your car FM radio for an idle local frequency with little
interference and select that station. It is suggested to select
a station in the frequency range of 88.1 ~107.9MHz.
Available frequencies vary depending on your geographic
location, so please check and select carefully.
Change the frequency on the Satechi B4 by holding the up
or down Tune Keys until the transmitting frequency matches
the frequency selected on your car radio.
[Setup Frequency]
Speakerphones are connected to phones using a procedure
called ‘pairing’. Refer to the specific instructions supplied with
your phone for details on pairing Bluetooth devices.
By following a few simple steps, a phone can be paired with
a speakerphone in a matter of minutes.
[Pairing]