Satechi Cyclone Micro 2+ 1080p Portable Media (MKV, AVI, MOV) Player Adapter with SD/SDHC Memory, USB Slot and Remote Control - Manual (Page 23)

Cyclone Micro 2 Multimedia Player
Page 23.
Version 0.7
Image Image Image Image Playback: Playback: Playback: Playback:
Playing image files using the Cyclone Micro 2 is very simple and supports a
variety of image formats.
Using the Cyclone Micro 2 remote control, navigate to “Picture” and press
ENTER to select it. This will activate the picture filter and take you to the
device list.
Once in the device list, use the navigation
buttons to select the device type the media is
located in. Depending on the size of the hard
drive and the number of files it contains, it
may take a few moments to detect.
E.g., if you want to view pictures that are stored on an attached USB hard
drive, select USB Disk.
When the device type has been selected, use the navigation buttons on the
remote control to select the partition for the media player to access.
After you have located the image file you wish to view, highlight it. You will
notice that a small preview of the image file in place of the picture icon.