SHIMPO DT-365 - Manual (Page 30)

30
Input signal setting (Function mode 4) 4.6.5
Signals to be entered for external synchronous emission can be selected either from open collector
input or voltage pulse input.
Set it to ON to select open collector input, and OFF to select voltage pulse input.
For details about the circuit, refer to 4.7.2 External pulse input.
Press the MODE key to save the settings in the function mode and move to the emission screen.
Operation Display
Change the setting
value
Indicates alternately
* Previous setting value
Open collector input Voltage pulse input
Go to the emission
screen
Go to the emission screen
Collectively save changes
of the function mode