Aiwa MM-VX200 - Manual (Page 16)

16
ENGLISH
Note
• VX200 Manager will not allow you to
upload MP3 files from the player to your
PC because of copyright considerations.
Only data files and voice files can be
uploaded to your PC.
• If the player is turned off during a copy
process on purpose or because of
insufficient battery power, the transferred
data might be corrupted. You might need
to initialize the player.
• You cannot upload any files during
playback of voice recording.
In this case, stop playback or voice
recording and click the Update button
(section 15 ) to upload the files.
Caution
Before you copy a data file or an PCM file
onto your PC, be sure to rename the file.
If a file with the same filename already
exists when you copy the files, the previous
copied file will be erased automatically
and the file will be replaced with a new
one.
13 Initialize , Download ,
and Upload buttons
(SmartMedia-ID)
These buttons operate as described in
section 12.
If you insert a new SmartMedia-ID, you
must initialize the SmartMedia-ID by
clicking on the Initialize button.
Note
• VX200 Manager will not allow you to
download the MP3 files more than 3
times.
• You cannot copy any MP3 files from the
player to your PC.
• The file name of “xxx.mp3” will be
changed to “xxx.mpm” after
downloading.
• The MP3 files in the SmartMedia-ID
cannot be played back with other player
due to SmartMedia-ID.
14 Delete button
A selected file in either Flash Memory or
SmartMedia-ID will be highlighted in blue.
Just click on the Delete button to remove
a file highlighted in blue.
15 Update button (Flash Memory)
If the information in the display list box
has been changed, click on the Update
button to refresh the Flash memory display
list box.
Note
You cannot download or upload any files
during playback of voice recording.
In this case, stop playback or voice
recording and click this Update button
to download or upload the files.
16 SmartMedia-ID format button
If you use the SmartMedia-ID formatted
by VX200 Manager with a digital camera
or other players, click this button to format.
17 Local Display list box
This list box shows the files stored on your
PC, such as the MP3 files and data files
that you want to copy to the player. The
default file type argument *.mp3 will display
only MP3 files in the current folder. You
may also select the file type argument *.*
to display all files or specify a type of file
to be displayed.
You may also select *.wav to display the
voice files you recorded. Even if you see
the standard wave format files, however,
you can play back only the voice file
recorded with the MM-VX200 player.