Thermo Fisher Scientific CyberScan CON 400 (For units manufactured from March 2010 onwards) - Manual (Page 35)

Instruction Manual CON 400
- 29 -
7.4 P3.0: Viewing probe data
Program 3 has five “view only” options that let you check
the probe’s parameters for diagnostic purposes. These
options show you the effective cell constant for each range.
The cell constant is adjusted according to your calibration.
From measurement mode
1. Press
the SETUP key to enter Set Up mode.
2. Press the MI/S or MR/T keys to scroll through
subgroups until you view parameter P3.0.
3. Press the ENTER key repeatedly to view the effective
cell constant for each range.
4. When you have scrolled through all probe data, you
will automatically return to the subgroup menu. Press
the CAL/MEAS key to return to measurement mode.
See Figure 25.
NOTES:
Cell constants may degrade with time and usage. You
can use this feature to alert you to the need for a new
probe prior to total failure.
Figure 25 - View probe data for
each measurement range