Thermo Fisher Scientific CyberScan pH 300/310 - Manual (Page 22)

19
6.2 Memory Recall
This function recalls the previous readings stored in the
memory. You can only access MR from the measurement
mode. Memory recall is in “Last In First Out” order.
To recall readings:
1. Press the MR key once to retrieve the last reading
stored. The memory location screen – MEM, “Loc”
and the memory number – will flash on the display.
2. Press the ENTER key to recall the reading stored
under that memory number.
For pH 300 meter only : Press the ENTER key again
to return to the “memory location” screen. See Figure
18.
For pH 310 meter only : Press the ENTER key again
to view the date (Month/Day format) and time
(Hour/Minute format) the reading was taken. See
Figure 19.
Press ENTER key again to return to the “memory
location” screen.
3. The display automatically moves to the next lower
memory location screen.
See figure 20.
Figure 18 - Memory recall function