Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 User Manual
Page 51
Advertising
136
DO Operation: Standardizing
DO6000 and PCD6500 meters
Technology Made Easy ...
The DO6000 and PCD6500
meter has two standardization modes for % saturation and mg/L:
automatic and manual. The factory setting is for a one point automatic standardization in %
saturation. Refer to the setup section to choose measuring units, one or two point
standardization, and automatic or manual standardization. There is no standardization for mbar
measuring units.
Note: Allow the probe to warm up for 30 minutes after connecting it to the meter and prior
to standardization.
DO standardization with Auto standard
recognition
DO standardization with Manual
standard recognition
Advertising