Thermo Fisher Scientific Alpha COND 1000 - Manual (Page 34)

Operating Instructions Thermo Scientific Alpha COND 1000
26
7.8 Calibration (CAL) sub-function
The calibration procedure in Advanced Set-up mode is identical to the procedure in
the Calibration mode. The only difference is that the controller will revert back to
Set-up mode (instead of Measurement mode) after calibration is completed.
7.8.1
Entering Calibration mode from Advanced Set-up mode
1) Enter Advanced Set-up mode. Push the ENTER key and scroll to Advanced
Set-up security code “22”. Push the ENTER key again.
2) Press the ▲ or ▼ keys to scroll until the upper display shows “CAL”.
3) See section 6 for complete calibration procedures.