Thermo Fisher Scientific ECFP21A1A1 Differential pH Sensor User Manual
Page 6
www.thermofisher.com
1.3. Safety Instructions
The ECFP21A1A1 1½ inch pH sensor should be installed and operated only by
personnel familiar with the sensor and qualified for such work.
A defective sensor should be returned to Eutech Instruments for repair or
replacement. Contact Eutech Instruments to obtain a Return Goods Authorization
(RGA) number.
No modifications to the ECFP21A1A1 1½ inch pH sensor are allowed. The
manufacturer/supplier accepts no responsibility for damage caused by unauthorized
modifications. The risk is borne entirely by the user.
1.4. Removal from Service / Correct Disposal of the Sensor
Removal from Service
• Disconnect the cable wiring from the controller terminal block.
• Remove the sensor from the mounting hardware.
Correct Disposal of Unit
• When the sensor is taken out of service, observe the local environmental
regulations for correct disposal.