West Control Solutions KS 800 CANopen Interface Manual - Manual (Page 27)

KS 800 CAN-Interface
2027 VAR Forced dig. output OUT1...OUT8 Unsigned8 rw * 2.1
2028 VAR Forced dig. output OUT9...OUT16 Unsigned8 rw * 2.1
2029 VAR Forced dig. output OUT17...OUT19 Unsigned8 rw * see
name
FB input
Process data fct. no. 0
2100 ARRAY Signal input fail Input_X_Failed Unsigned8 ro 1.0
2101 ARRAY Main variable x1 FixedPoint1 ro 1.0
2102 ARRAY Raw measurement value before meas.val.corr.
INP1 FixedPoint1 ro 1.0
Parameter and configuration data fct. no. 1
2110 ARRAY Measurement value correction X1 input X1in FixedPoint1 rw 1.0
2111 ARRAY Measurement value correction X1 output X1out FixedPoint1 rw 1.0
2112 ARRAY Measurement value correction X2 X2in FixedPoint1 rw 1.0
2113 ARRAY Measurement value correction X2 X2out FixedPoint1 rw 1.0
2114 ARRAY Sensor type (T,H) C200 Unsigned16 rw * 1.0
2115 ARRAY Fail: sensor break (T) C205 Unsigned16 rw * 1.0
2116 ARRAY Phys. value at 0% X0 FixedPoint1 rw * 1.0
2117 ARRAY Phys. value at 100% X100 FixedPoint1 rw * 1.0
2118 ARRAY Substitute value at sensor fail XFail FixedPoint1 rw * 1.0
2119 ARRAY Filter time const. meas. value processing Tfm FixedPoint1 rw * 1.0
211A ARRAY Reference temperature Tkref FixedPoint1 rw * 1.0
211B ARRAY Signal allocation dig. signals C190 Unsigned16 rw * 1.0
FB analog out
Process data fct. no. 0
2130 ARRAY Forced analog output AOUT1...AOUT16 FixedPoint1 rw 3.0
2140 ARRAY Xo FixedPoint1 rw * 3.0
2141 ARRAY X100 FixedPoint1 rw * 3.0
2142 ARRAY Mode/Scr A-Out C540 Unsigned16 rw * 3.0
FB controller
Process data fct. no. 0
2200 ARRAY Status 1 Unsigned8 ro 1.0
2201 ARRAY Eff. set-point Weff FixedPoint1 ro 1.0
2202 ARRAY Eff. process value Xeff FixedPoint1 ro 1.0
2203 ARRAY Effective correcting variable Ypid FixedPoint1 ro 1.0
2204 ARRAY Control deviation xw FixedPoint1 ro 1.0
2205 ARRAY Automatic/manual switch-over Unsigned8 rw 1.0
9499 040 49511 27