ZAGG Coda Forte - Manual (Page 8)

Pairing with a Macintosh computer
• After charging the Coda Forte, open System Preferences
• Click on Bluetooth under the Internet & Wireless section
• Make sure Bluetooth is on by checking the “on” box
• Press the “+” button in the lower-left corner of the window
• On the Coda Forte, hold down the power button for 8 seconds
The headphones will make several tones during this process. Keep holding the button for the full 8 seconds.
• Select “iFrogz Coda Forte” from the list and click Continue
• The computer will now connect to the Coda Forte. Close the window when finished.
• Re-open System Preferences and click on Sound under Hardware
• Select Output at the top of the window
• Find “iFrogz Coda Forte Stereo” and click on it
• Enjoy!