Dip switch settings, Ac1 momentary (default), Ac1 latching – AMX Power Controller PC1 User Manual
Page 2: Discrete on/off
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
12/09
©2009 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-0670-01
REV: B
DIP Switch Settings
The 4-position DIP Switch on the front panel is used to set the mode of
operation for the AC1 (remote operation) pushbutton (FIG. 3).
The settings are shown below:
AC1 Momentary (Default)
AC1 Latching
Discrete ON/OFF
FIG. 3 DIP Switch and AC1 Remote Operation Pushbutton
Switch
Setting (Down = On)
1
ON
2
ON
3
ON
4
ON
Switch
Setting (Down = On)
1
OFF
2
OFF
3
ON
4
ON
Switch
Setting (Down = On)
1
ON
2
OFF
3
OFF
4
ON
1 2 3 4
1 2 3 4
1 2 3 4