Alicat Flow Vision SC User Manual
Page 8
8
The following screen will inform you that Flow Vision™ SC is ready to be
installed. You can take this opportunity to go back and make changes or to
cancel the installation.
If you are satisfied with your choices, you can continue with the installation by
choosing the button marked “Next”.
You
will not see an installation screen with a progress bar visually indicating
the progress of the installation of Flow Vision™ SC onto your computer.
Do not turn off or restart the computer during the installation process.
Turning off or restarting the computer during this process will cause Flow
Vision™ SC to not install properly and possibly cause damage to your computer.
When the installation process is complete, a screen will appear indicating that
Flow Vision™ SC has been successfully installed on your computer. To exit
this screen and the Flow Vision™ SC installation process, select the button
marked “Close”.
Once you have selected “Close”, the installation screen will disappear from
your screen.