72 series, System operations unlock doors, Auxiliary output 1 – Ultra Start 72 SERIES 1172 User Manual

Page 8: System operations trunk release, Lock doors

Advertising
background image

PAGE 9

72 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

UNLOCK DOORS

1. Press then release the Unlock Button on the remote transmitter.
2. The park lights will flash and the horn (optional) will honk two times.
3. The doors will unlock and the dome lights will activate. (optional)
4. The LEDs will stop flashing.

- The horn can be programmed to honk with Car Finder and Panic Mode only.

- If the system is in valet mode the doors will lock/ unlock but the horn will not honk.
- The LEDs will be on solid if the system is in valet mode.

See Valet / Service Mode in this manual for further information

NOTES:
- If the panic mode is activated the first press of the unlock button will turn off the horn off and

the second press will unlock the doors.

** Optional Feature may require additional parts and labor.

PRESS & RELEASE

The Aux output can be programmed for a variety of custom applications.
(SEE DEALER FOR DETAILS)

1. To activate Auxiliary Channel 1 output press and hold the # Button for 3 seconds.
2. The system will unlock the doors then the AUX 1 output will activate.
3. Release the buttons for a momentary output or continue holding for up to a 5
second output.

This feature can be used to open the trunk, open or close power windows or control
sliding doors on minivans.

*NOT AVAILABLE ON 2 BUTTON REMOTE.

AUXILIARY OUTPUT 1

HOLD THE # BUTTON

PAGE 8

72 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

TRUNK RELEASE

1. Press then HOLD the Unlock Button on the remote transmitter.
2. The park lights will flash and the horn (optional) will honk two times.
3. The doors will unlock and the dome lights will activate. (optional)
4. The LEDs will stop flashing.
5. Continue to HOLD the Unlock Button until the trunk release activates.

NOTES: - For safety, the trunk release will not active when ignition key is ON.

** Optional Feature may require additional parts and labor.

PRESS & HOLD

1. Press and release the Lock Button on the remote transmitter.
2. The park lights will flash and the horn (optional) will Honk one time.
3. The doors will lock.
4. The LED will start flashing within five seconds.

- The horn can be programmed to honk with Car Finder and Panic Mode only.

- If the system is in Service Mode the doors will lock/ unlock but the horn will not honk.
- The LEDs will be on solid if the system is in Service Mode.

See Valet / Service Mode in this manual for further information

NOTES:
- If the panic mode is activated pressing the lock button on the remote will stop the horn

from sounding.

** Optional Feature may require additional parts and labor.

NEW- The LEDs can now be programmed not to flash when the doors are locked by
the remote transmitter.

*2 Button remote- The system must be programmed for 2 button remote lock/unlock
toggle to operate the lock feature on the vehicle. See dealer for more information.

LOCK DOORS

PRESS & RELEASE

Advertising