Badger Meter ORION Classic (CE) - Manual (Page 8)

Uninstalling Previous Software Using Remove Programs
1. Press the green power key on the keypad to power
up the handheld.
2. Tap the Start button in the top left corner of
the handheld screen to see the menu.
3. Tap Settings, tap the System tab and tap Remove
Programs.
Result: The Remove Programs screen opens.
Figure 1: Settings> System tab
4. Tap to select the file labeled "Badger Meter, Inc
Badger Field Ap…" file. Then tap the Remove
button.
Result: A window opens to confirm the removal as
shown in Figure 3.
Figure 2: Remove Programs
5. Tap Yes to confirm the program removal.
6. The "Microsoft.NET CF 3.5" file may also display on
the Remove Programs screen. If it does, tap to select
it.
7. Then tap the Remove button and tap Yes to confirm
the program removal.
Figure 3: Confirm program removal
Once the previous software programs are uninstalled, the handheld is ready for the new software installation. Refer to
"Installing ORION Meter Reading Software for the Trimble Ranger" on page 12 .
ORION® Handheld Meter Reading System 2.2 Software Installation
Page 8 August 2012